อุปกรณ์กําจัดหนูและแมลงอิเล็กทรอนิกส์ 1 . 5 v

3. Directions for use:1) Step #1: Using a plastic or wooden knife, insert a small amount of peanut butter (or any food that rats prefer) through a bottom hole on the back plate.2) Step #2: Insert 4C; batteries into battery compartment or use the adapter DC-6V3) Step #3: Identify location with rat activity look for worn trails or walkways. Place unit on floor against wall, the entrance in- with the trail; rats prefer to travel against a wall.4) Step #4: Press switch to “On” position. Unit will hum, and the green light will flash, then the red light will flash every 5 seconds,indicating that the unit has been enabled. To prevent incidental shock avoid contact with metal plates. Do not touch the bottom of the machine.4. Note Items for Use:1) The rat triggers metal plates when rodent enter the unit, and the unit emits high voltage sock immediately, the red light flashes.High voltage produced time is 4 minutes. Firstly it delivers high voltage last for 1 minute, later impulse electric-shock which imitating rat heartbeat 15HZ for each time and it continues for 3 minutes, then the high voltage shock stops, the light turns from red to green and flashes once every 5 seconds, here high voltage shock will not be produced until restarting the unit next time.2) Every after killing the rat, press switch to “OFF” position (O) and remove case of the unit to clean the chamber, dry it under the sun,then it can be reinstalled to use. (Use cleaning agent to clean out the smell that the rat remained, or rats may not come again).3) In the high-voltage chamber, there are three metal plates, when a mouse or rat enters, it will conduct the charged electricity from one plate to another and will be killer instantly. To prevent incidental shock avoid contact with metal plates.4) If red light and green light flash in a chain once every 2 seconds after power on or rat killing, indicating that the batteries should be changed with new to avoid affecting rat killing function. Turn off power before changing batteries.5) Remove batteries from the unit if they are not required for extended periods of time in order to avoid damage to the unit resulting from a leaking battery.5. Warnings:1) Never use this product around small children, small household pets, life support devices, and combustible materials.2) Never use this device on wet surface to avoid high voltage electric leakage.6. Technical Specifications:1) Power supply: 1.5V 4*CBattery.Low battery indicator: 4.8V±0.2V2) Static work current: ≤50uAHigh voltage working current: ≤380mA3) High voltage: 7000-9000VHigh voltage produced time: 4 minutes.4) New battery can be supplied for electronic shock 20-30 times.Package Included:1 x Rat Killer (Without Battery)Note:-Due to different producing batches, product details might be a little different. If you minding the difference, please buy it carefully.